www.3499.com
0222.com
葡京热佳构视频-0222.com-www.2017338.com
 
  Your location:Index > Technical  
Technology of PPS coatingwww.3499.com
Author:admin  From:Letian Plastics   Hits:8522  Update:2009-1-5

1, coating preparation

According to the parameters requirement of coating, suitable PPS resin and auxiliary material are chosen. Thick slurry is prepared with the addition of diphenyl oxide. Before usage, proper amount of acetone or ethanol are added in order to convenience for operation.

2, Treatment of base materials

1) Through sanding treatment, the surface coated is keeping smooth and the cast parts are without sentus and sand explosion. The edge angle areas should be to maximize use of excessive arc R ≥ 5mm.

2) Descaling, sand-blasting, brushing and chemical treatment to remove oxide or uncontaminated Oil;

3) Spray paint the coating prepared on the work surface, dry, plasticize and quench treatment.
8455.com
Copyright:Chengdu Letian Plastics Co.,Ltd Technical: 
Add:Gaopeng Chengdu Road on the 8th (high-tech zones) Post:610041
Tel:028-85182892 028-85132168 Fax:028-85161483 Website:www.cnletian.com Email:sggl@cnletian.com